Contactors

Auxiliary Contact 2 NO 2 NC 100-EFB22

1 Phase SSC 20A 600VAC 5-32 V DC control

SMC-50 with Bypass 201A, 480V 150-S201NBD

IEC 80 A Contactor 100-E80KJ200

IEC 38 A Contactor

Tongue Interlock, MT-GD2, No Special Features, 3 N.C. Safety, 1 N.O Aux, Break Before Make, 3 N.C. Safety Contacts, 1 N.O. Auxillary Contact, GD2 Standard, M20 Conduit, Tongue Interlock Switch, Die Cast Alloy (red)

Incremental Encoder 10mm Diameter Shaft

PowerFlex700 AC Drive, 480 VAC, 3 PH, 3.4 Amps, 2 HP Normal Duty, 1.5 HP Heavy Duty, IP20 / Type 1, with conformal coating, No HIM (Blank Plate), Brake IGBT Installed, Without Drive Mounted Brake Resistor, Second Environment Filter per CE EMC directive

CONNECTION KIT FOR REVERSING CONTACTORS

Miniature Contactor, Screw Type Terminals, 9 A, System Control Voltage: 24 (17...30)V DC Diode, 3 N.O. Main Contacts, 1 N.C. Auxiliary Contact, 1

Auxiliary Contact. 1 CO, Mount Location: Right

IEC Miniature Control Relay

IEC Miniature Control Relay

All power connections are at the top of the contactor for wiring convenience.Contactor can be field wired for single- or three-phase applications .

NEMA size 3 300 contactor

Miniature Circuit Breaker, Standard configuration, AC, 2 Pole Configuration, Trip Curve C, 15 A

104-E MCS-E Reversing Contactor, 580A, AC3 duty, 100-250V AC 50/60Hz / 100-250V DC Electronic Coil w/ PLC Interface, 1 N.O. 1 N.C. (with mechanical interlock only)

Solid State Contactor, 25 Amperes, Open Type, 600V AC, 20-275 volts AC, 24...190V DC

Solid State Contactor, 25 Amperes, Open Type, 230V AC, 20-275 volts AC, 24...190V DC

500F, 500FC NEMA AC/DC Contactor,Motor Loads,Feed-Through ,SIZE 1, Open, 115-120V 60Hz, 3 Power Poles, Yes , 27 , 110/120V 50/60 Hz ,

500F, 500FC NEMA AC/DC Contactor,Motor Loads,Feed-Through ,SIZE 4, Open, 115-120V 60Hz, 3 Power Poles, Yes , 135 , 110/120V 50/60 Hz ,

NEMA Size 0 Manual Motor Starter

IEC 265 A Contactor

3 Phase SSC 40A 600VAC AC or DC AC fan

NEMA Non-Reversing Starter

60 A Safety Contactor

NEMA Size 1, 27A Contactor

700-K MCS Mini Contactors, Screw Type Terminals, System Control Voltage: 24 (17...30)V DC Diode, 2 N.O. / 2 N.C. Auxiliary Contacts

100S-C Safety Contactor, 9A, Line Side, 24V DC (w/Elec. Coil), 3 N.O., 3 N.O. 2 N.C., Bifurcated Contact

IEC Contactor

Renewal Contact Kit

140G - Molded Case Circuit Breaker, G frame, 25 kA Interrupt Rating, T/M - Thermal Magnetic, 3 Poles, Rated Current 50 A

85 A Safety Contactor

9 A Safety Contactor

IEC 265 A Contactor

IEC 205 A Contactor

Auxiliary Contact 1 NO 1 NC

IEC 305 A Contactor

1 Phase SSC 30A 600VAC 5-32 V DC control

IEC 30 A Contactor