-
Part No.: 7187809SK expansion valve ID 338652, ref : 1700274880 dt 2022.10.24 pos# 20 Special SK Expansion valve for 3370524,UOM: EA
Availability:Forward delivery 5-7 weeks -
Part No.: 7888278TX CableNet – Taking cable management to a new level IT network rack, preconfigured with essential cable routing components, prepared for individual interior installation.UOM: EA
Availability:Forward delivery 5-7 weeks -
Availability: In stock -
Availability:Forward delivery 5-7 weeks -
Part No.: 7391000Data Rack for optimum accessibility from all sides during assembly and installation as well as extensive mobility when using twin castors.UOM: EAWHD: x50 mm
Availability:Forward delivery 5-7 weeks -
Part No.: 7401000For securing and stabilising two pairs of 482.6 mm (19") mounting angles in the Data Rack, the length is adjustable.UOM: P2
Availability:Forward delivery 5-7 weeks -
Availability:Forward delivery 5-7 weeks -
Part No.: 7400000DK Data Rack distributor rack, WHD: 550x1899,5x750 mm, 40 U, RAL 7035 7400000UOM: EA
Availability:Forward delivery 5-7 weeks -
Availability:Forward delivery 5-7 weeks -
Part No.: 6746000CX one-piece console 6746000UOM: EAOne-piece console for operating and monitoring, with large mounting plate and a high protection category of IP 55, available in four different widths.
More
Availability:Forward delivery 5-7 weeks -
Part No.: 3237300Blue e+ outlet filter - 3237300UOM: EAWHD: 116.5x116.5x33.2 mmThe outlet filter is used in conjunction with the corresponding fan-and-filter unit to dissipate heat loss from enclosures, ventilate the enclosure and protect temperature-sensitive components. This is achieved through the direct infeed of ambient air, the temperature of which must be lower than the permissible internal temperature of the enclosure.
More
Availability: In stock -
Part No.: 9782828CS Toptec, bayableUOM: EAWHD: 800 mmx 2,000 mmx800 mm mmDesign : for baying With cut-out for outdoor cooling units 2 - 5 kWMaterialEnclosure frame : Stainless steel 1.4301 (AISI 304) Enclosure panels and base/plinth trim Aluminium, AlMg3 Rain canopy : AluminiumSurface finish : Powder-coated UV-resistant pure polyesterColourRAL 7035Supply includesBayable, twin-walled outdoor enclosure
Enclosure frame with 25 mm system punchings in the roof and base frame plus vertical sections with two mounting levels
Front door with door stay, swing lever handle and profile half-cylinder, lock BJ 20027
Rear panel
Rain canopy
Base/plinth with screw-fastened gland plates and screw-fastened trim panels front and rearDimensionsOverall height: 2,145 mm
Rain canopy height: 45 mm
Height base/plinth: 100 mmNumber of doors1LockLock version: 4-point locking
Number of locks: 1
Lock insert: BJ20027Gland plateSize: 2
Qty.: 2Protection category NEMANEMA 3RNEMA 12IK CodeIK10NoteAll enclosure panels are doubled and earthed (external wall onto internal wall)When assembling a free-standing enclosure, bayable side panels for CS Toptec are requiredNote on Model No.A climate control unit is required to seal the cut-outPacks of1 pc(s).Net weight82 kgGross weight92 kgETIM 9EC000261ECLASS 8.027180101More
Availability:Forward delivery 5-7 weeks -
Part No.: 6206700Top-mounted joint CP 60 Horizontal outlet - 6206700UOM: EAWHD: 146x158 mmFor swivel mounting of the support arm system on horizontal surfaces – also suitable for suspending from the ceiling. Removable cover for simple cable entry.
More
Availability:Forward delivery 5-7 weeks -
Availability:Forward delivery 5-7 weeks -
Part No.: 6450050Power pack For TFT monitor - 6450050UOM: EAWHD: 112x31x47 mmSM Power pack, For TFT-Monitor, Input voltage: 100-240 V, Ausgang: 12 V, L: 1,5 m
Availability:Forward delivery 5-7 weeks -
Part No.: 1683600Switch housing HDUOM: EAWHD: Width front: 100 mm Width (rear): 122 mmxHeight, front: 220 mm Height rear: 242 mmxDepth: 90 mm mmEnclosure solution with three cut-outs for switches, tailored to the requirements of the food and beverage industry. All-round gap-free silicone seal between enclosure and cover. Hygiene-compliant quick-release hexagon fastener.More
Availability:Forward delivery 5-7 weeks -
Part No.: 3243400Blue e+ outlet filter EMCUOM: EAWHD: 323 mmx323 mmx44.7 mm mmFeatures
Design Wall-mounted EMC
Benefts Easy flter changes, thanks to a new opening mechanism on the louvred grille Faster installation on the enclosure with optimised detent hooks Tool-free assembly
Colour RAL 7035
Supply includes Outlet flter and EMC flter mat
To ft Model No. SK 3243.8xx/3244.8xx/3245.8xx
Protection category NEMA Type 12 with chopped-fbre flter Type 3, 3R, 4, 4X with chopped-fbre flter and hose-proof hood
IP protection category to IEC 60 -529 IP 54 with chopped-fbre flter and IP 56 with chopped-fbre flter and hose-proof hoodNet weight 0.94 KGS
Gross weight 0.941 KGS
ETIM 9 EC002513
ETIM 8 EC002513
ECLASS 8.0 27180706ApprovalsApprovals UL + C-UL - FTTA and UR + C-UR (recognized)More
Availability:Forward delivery 5-7 weeks -
Part No.: 3239400Blue e+ outlet filter EMCUOM: EAWHD: 204 mmx204 mmx45.8 mm mmFeatures
Model No. SK 3239.400
Design Wall-mounted EMC
Benefts Easy flter changes, thanks to a new opening mechanism on the louvred grilleFaster installation on the enclosure with optimised detent hooks .Tool-free assembly
Colour RAL 7035
Supply includes Outlet flter EMC flter mat
Mounting cut-out Cut-out width: 177 mmCut-out height: 177 mm
To ft Model No. SK 3239.8xxProtection category NEMA Type 12 with chopped-fbre flter Type 3, 3R, 4, 4X with chopped-fbre flter and hose-proof hoodETIM 9 EC002513
ETIM 8 EC002513
ECLASS 8.0 27180706ApprovalsApprovals UL + C-UL - FTTA and UR + C-UR (recognized)More
Availability:Forward delivery 5-7 weeks -
Part No.: 6900740Industrial WorkstationsUOM: EAWHD: 600 mmx1,000 mmx645 mm mmIW Industrial Workstation, enclosure WHD: 600x900x600 mm, with worktop, keyboard drawer, designer door at the front, rear door
More
Availability:Forward delivery 5-7 weeks -
Availability:Forward delivery 5-7 weeks

















