Software & Services

SK Blue e+ fan-and-filter unit, 272 m³/h, 24 V (DC), WHD 255 x 255 x 129 mm, RAL 7035

VX base/plinth trim panel, side, H: 100 mm, for D: 1000 mm, sheet steel

Combination rail, 1 U, for 482.6 mm (19"), for cable routing and strain relief at the 19 level, for installation within the 19 mounting level or at the 19 system punchings

Sheet steel door, vertically divided, solid

AE STAINLESS STEEL SPC ACCESSORIES complete door suitable for AE 1017.500 (WH 800x1200mm, 316L) including fixing accessory

SM Connection cable, For power pack, with IEC 60 320, L: 1,5 m

VX support bracket / spacer

VX base/plinth installation bracket, for sheet steel base/plinth, for base/plinth trim panels, H: 100/200 mm

AX Compact enclosure, WHD: 1000x1200x300 mm, stainless steel 1.4404, with mounting plate, two-door, with 3-point lock system

SZ Wall mounting bracket, for AX and KX, stainless steel 1.4404, wall distance: 20 mm

AX Perforated door strip, for AE stainless steel, for H: 1200 mm

AX Sheet steel wiring plan pocket, width-variable, L: 475 - 575 mm , for door width 600 mm

AX Special Compact enclosure, stainless steel, width 600,0 mm, product height 760,0 mm, product depth 210,0 mm, 316L, Ref: 13136918#10

SV Cable entry gland, 14xM25/32, insulating material

SV Cable entry gland, with sealing membranes, 32x Ø 7-16 mm, 4x Ø 10-20 mm, 3x Ø 14-26 mm, insulating material

130° hinge for PS, ES and DK range, Ref : 1600134715

SK Blue e+ fan-and-filter unit, 867/910 m³/h, 230 V, 1~, 50 Hz/60 Hz, WHD 323 x 323 x 156 mm, RAL 7035

KEBxHS404022S4B1 SK Klippon EBx HS, Height:400mm, Width:400mm, Depth:220mm, Gland plates: Bottom, Material: Stainless steel 1.4404 (316L), Brushed, silver

SK Pleated filter IP54, for fan-and-filter units/outlet filters 3239.xxx, WHD: 167x167x21 mm

SK Blue e+ outlet filter, EMC, for fan-and-filter unit 3238.8xx, WxH 116.5 x 116.5 mm, RAL 7035

VX base/plinth trim panel, side, H: 100 mm, for D: 500 mm, sheet steel 8660032

SK Blue e+ fan-and-filter unit, 625/716 m³/h, 115 V, 1~, 50 Hz/60 Hz, WHD 323 x 323 x 144.5 mm, RAL 7035

VX levelling component for base/plinth system VX, H: 100 mm

Optional trim panel attachment for base/plinth VX. Additional bracket for attaching trim panels with brush strip or vented trim panel in the depth of the VX base/plinth system

DK Document clip, magnetic

SK Blue e+ fan-and-filter unit, 63 m³/h, 24 V (DC), WHD 148.5 x 148.5 x 82.5 mm, RAL 7035

Rail for interior installation in AX compact enclosure, for depth: 350 mm

AX base/plinth trim panel, front and rear, H: 100 mm, for W: 1000 mm

AX base/plinth component, sides, height: 100 mm, for depth: 300 mm

VX SPECIAL DIMENSION (13151508#10) material 1.0917+Z (10346-DX51D+Z140) W800MMxH2200MMxD800MM, RAL7035

VX SPECIAL DIMENSION (13151508#20) (front without lamp hole)material 1.0917+Z (10346-DX51D+Z140) W800MMxH2200MMxD800MM, RAL7035

180° hinge lever for VX IT

VX IT Hinge, opening angle 180°, screws Model No. 5050.616

KX Terminal box, WHD: 300x200x120 mm, stainless steel 1.4301, without mounting plate, with cover, with quick-release fasteners 1566000

SZ Wall mounting bracket, for AX and KX, stainless steel, wall distance: 10 mm 1594010

FT System window, for VX, TS, VX SE, 60 section, WHD: 500x570x77 mm, for W: 600 mm 2736530

DK Data Rack distributor rack, WHD: 550x1899,5x750 mm, 40 U, RAL 7035 7400000

1012000

5051135

SK Blue e+ fan-and-filter unit, 20/25 m³/h, 230 V, 1~, 50 Hz/60 Hz, WHD 116.5 x 116.5 x 64.5 mm, RAL 7035