Panels & Doors

VX baying enclosure system, WxHxD: 800x2000x800 mm, sheet steel, C4-H, with mounting plate, single door at the front

VX side panel, screw-fastened, for HxD: 2000x800 mm, sheet steel, C4-H

Design	wall-mounted Outdoor
Product description	The energy-efficient wall-mounted cooling unit Blue e+ Outdoor can be used worldwide, thanks to its multi-voltage capability, and is suitable for use with Toptec project solutions, for example.
Benefits	Average 75% energy savings thanks to speed-regulated components and heat pipe technology  Longer service life of the components inside the enclosure and the cooling unit due to component-friendly cooling .Intuitive operation due to touch display and intelligent interfaces
Product modification	The cover for the connection box to protect the electrical connection to the cooling unit has not been included with the supply since the start of 2024. Covers 3355.200 and 3355.210 can be ordered as optional accessories.
Material & Surface finish	Aluminium AlMg3 ,Powder-coated UV-resistant pure polyester & color RAL 7035
Supply includes	Condenser with hydrophobic RiNano coating Integral electric condensate evaporation Fully wired ready for connection (plug-in terminal strip) .Mounting frame for universal attachment to outdoor enclosures for external, partial internal and full internal mounting. Assembly parts
Noise level	70 dB(A)
Product description	SK Cooling unit Blue e+, wall-mounted, Outdoor, 2.5 kW, 110-240 V, 1~, 380-480 V, 3~, 50-60 Hz, aluminium, WHD: 465 x 1640 x 260 mm
Energy efficiency ratio (EER) 50/60 Hz L35 L35	Refrigeration factor L35 L35 (EER) 50 Hz: 2.31 Refrigeration factor L35 L35 (EER) 60 Hz: 2.31

The Terminal Box KX 1560.000 from Rittal is made of stainless steel 1.4301 (AISI 304), measures 150 x 150 x 80 mm, and offers data quality and consistency of engineering, as well as flexibility and safety in a wide range of applications. It has an IP66 protection rating, an all-round foam PU gasket in the lid, a protective conductor connection in the enclosure, and quick-lock fasteners.

Maximum air throughput via pleated filter included in the delivered state Easy filter changes

,thanks to a new opening mechanism on the louvred grille . Faster installation on the enclosure with optimised detent hooks Diagonal fan technology achieves more even and constant ventilation of the enclosure, thanks to improved pressure stability. Tool-free assembly

RAL 7035 . Diagonal, shaded pole motor. 115 V, 1~, 50 Hz/60 Hz

Type 12 with chopped-fibre filter/pleated filter . Type 3 . Type 3R . Type 4. Type 4X with chopped-fibre filter/pleated filter and hose-proof hood . With the fan-and-filter unit 3237.XXX, electrical connection is made via two single wires (length approx. 300 mm) on the unit, for all other fan-and-filter units, a screwless spring terminal is used . Miniature circuit-breaker/fuse: 4 A

SK Blue e+ fan-and-filter unit, EMC, 700/770 m³/h, 230 V, 1~, 50 Hz/60 Hz, WxHxD 323 x 323 x 156 mm, RAL 7035

Spare part

The robust stainless steel enclosure features an integral locator system, enabling fast, easy, reliable and extensive system configuration with no drilling required.

The robust stainless steel enclosure features an integral locator system, enabling fast, easy, reliable and extensive system configuration with no drilling required.

Material

Enclosure: Stainless steel
Door: Stainless steel, all-round foamed-in PU seal
Mounting plate: Sheet steel
Stainless steel 1.4301 (AISI 304)

For the attachment of AX and KX stainless steel enclosures.

One-piece console for operating and monitoring, with large mounting plate and a high protection category of IP 55, available in four different widths.

Complete fan unit with EMC shielding for tool-free mounting on surfaces. Air throughput from 20 – 900 m³/h

SK Blue e+ fan-and-filter unit, EMC, 225/245 m³/h, 230 V, 1~, 50 Hz/60 Hz, WxHxD 255 x 255 x 129 mm, RAL 7035

The outlet filter is used in conjunction with the corresponding fan-and-filter unit to dissipate heat loss from enclosures, ventilate the enclosure and protect temperature-sensitive components. This is achieved through the direct infeed of ambient air, the temperature of which must be lower than the permissible internal temperature of the enclosure.

For retrospective mounting on all sheet steel compact enclosures, sheet steel, with cam lock.

AE Compact enclosure, WHD: 600x600x350 mm, Sheet steel, with mounting plate, single-door, with two cam locks